Technical data

106 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
n/a :SYSTem:ERRor? (see
page 567)
<error> ::= an integer error code
<error string> ::= quoted ASCII
string.
See Error Messages (see
page 751).
:SYSTem:LOCK <value>
(see page 568)
:SYSTem:LOCK? (see
page 568)
<value> ::= {{1 | ON} | {0 |
OFF}}
:SYSTem:MENU <menu>
(see page 569)
n/a <menu> ::= {MASK | MEASure |
SEGMented | LISTer}
:SYSTem:PRESet (see
page 570)
n/a See :SYSTem:PRESet (see
page 570)
:SYSTem:PROTection:LO
CK <value> (see
page 573)
:SYSTem:PROTection:LO
CK? (see page 573)
<value> ::= {{1 | ON} | {0 |
OFF}}
:SYSTem:SETup
<setup_data> (see
page 574)
:SYSTem:SETup? (see
page 574)
<setup_data> ::= data in IEEE
488.2 # format.
:SYSTem:TIME <time>
(see page 576)
:SYSTem:TIME? (see
page 576)
<time> ::= hours,minutes,seconds
in NR1 format
Table 34 :SYSTem Commands Summary (continued)
Command Query Options and Query Returns
Table 35 :TIMebase Commands Summary
Command Query Options and Query Returns
:TIMebase:MODE
<value> (see
page 579)
:TIMebase:MODE? (see
page 579)
<value> ::= {MAIN | WINDow | XY |
ROLL}
:TIMebase:POSition
<pos> (see page 580)
:TIMebase:POSition?
(see page 580)
<pos> ::= time from the trigger
event to the display reference
point in NR3 format
:TIMebase:RANGe
<range_value> (see
page 581)
:TIMebase:RANGe? (see
page 581)
<range_value> ::= time for 10 div
in seconds in NR3 format
:TIMebase:REFerence
{LEFT | CENTer |
RIGHt} (see page 582)
:TIMebase:REFerence?
(see page 582)
<return_value> ::= {LEFT | CENTer
| RIGHt}
:TIMebase:SCALe
<scale_value> (see
page 583)
:TIMebase:SCALe? (see
page 583)
<scale_value> ::= time/div in
seconds in NR3 format