Technical data

108 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:TRIGger:MODE <mode>
(see page 598)
:TRIGger:MODE? (see
page 598)
<mode> ::= {EDGE | GLITch |
PATTern | TV}
<return_value> ::= {<mode> |
<none>}
<none> ::= query returns "NONE"
if the :TIMebase:MODE is ROLL or
XY
:TRIGger:NREJect {{0
| OFF} | {1 | ON}}
(see page 599)
:TRIGger:NREJect?
(see page 599)
{0 | 1}
:TRIGger:SWEep
<sweep> (see
page 600)
:TRIGger:SWEep? (see
page 600)
<sweep> ::= {AUTO | NORMal}
Table 36 General :TRIGger Commands Summary (continued)
Command Query Options and Query Returns
Table 37 :TRIGger[:EDGE] Commands Summary
Command Query Options and Query Returns
:TRIGger[:EDGE]:COUPl
ing {AC | DC |
LFReject} (see
page 602)
:TRIGger[:EDGE]:COUPl
ing? (see page 602)
{AC | DC | LFReject}
:TRIGger[:EDGE]:LEVel
<level> [,<source>]
(see page 603)
:TRIGger[:EDGE]:LEVel
? [<source>] (see
page 603)
For internal triggers, <level>
::= .75 x full-scale voltage from
center screen in NR3 format.
For external triggers, <level>
::= ±(external range setting) in
NR3 format.
For digital channels (MSO
models), <level> ::= ±8 V.
<source> ::= {CHANnel<n> |
EXTernal} for DSO models
<source> ::= {CHANnel<n> |
DIGital<d> | EXTernal } for MSO
models
<n> ::= 1 to (# analog channels)
in NR1 format
<d> ::= 0 to (# digital channels
- 1) in NR1 format
:TRIGger[:EDGE]:REJec
t {OFF | LFReject |
HFReject} (see
page 604)
:TRIGger[:EDGE]:REJec
t? (see page 604)
{OFF | LFReject | HFReject}