Technical data

292 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
16 :FUNCtion Commands
:FUNCtion:SCALe
(see page 790)
Command Syntax
:FUNCtion:SCALe <scale value>[<suffix>]
<scale value> ::= integer in NR1 format
<suffix> ::= {V | dB}
The :FUNCtion:SCALe command sets the vertical scale, or units per
division, of the selected function. Legal values for the scale depend on the
selected function.
Query Syntax
:FUNCtion:SCALe?
The :FUNCtion:SCALe? query returns the current scale value for the
selected function.
Return Format
<scale value><NL>
<scale value> ::= integer in NR1 format
See Also • "Introduction to :FUNCtion Commands" on page 278
• ":FUNCtion:RANGe" on page 290