Technical data

:MTESt Commands 21

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 385

:MTESt:AMASk:UNITs

(see page 790)

Command Syntax

:MTESt:AMASk:UNITs <units>

<units> ::= {CURRent | DIVisions}

The :MTESt:AMASk:UNITs command alters the way the mask test

subsystem interprets the tolerance parameters for automasking as defined

by :MTESt:AMASk:XDELta and :MTESt:AMASk:YDELta commands.

• CURRent — the mask test subsystem uses the units as set by the

:CHANnel<n>:UNITs command, usually time for

ΔX and voltage for ΔY.

• DIVisions — the mask test subsystem uses the graticule as the

measurement system, so tolerance settings are specified as parts of a

screen division. The mask test subsystem maintains separate XDELta

and YDELta settings for CURRent and DIVisions. Thus, XDELta and

YDELta are not converted to new values when the UNITs setting is

changed.

Query Syntax

:MTESt:AMASk:UNITs?

The :MTESt:AMASk:UNITs query returns the current measurement units

setting for the mask test automask feature.

Return Format

<units> ::= {CURR | DIV}

See Also • "Introduction to :MTESt Commands" on page 379

• ":MTESt:AMASk:XDELta" on page 386

• ":MTESt:AMASk:YDELta" on page 387

• ":CHANnel<n>:UNITs" on page 235

• ":MTESt:AMASk:SOURce" on page 384

• ":MTESt:SOURce" on page 409

Example Code • "Example Code" on page 379