Technical data

:SAVE Commands 24

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 443

:SAVE:WAVeform:SEGMented

(see page 790)

Command Syntax

:SAVE:WAVeform:SEGMented <option>

<option> ::= {ALL | CURRent}

When segmented memory is used for acquisitions, the

:SAVE:WAVeform:SEGMented command specifies which segments are

included when the waveform is saved:

• ALL — all acquired segments are saved.

• CURRent — only the currently selected segment is saved.

Query Syntax

:SAVE:WAVeform:SEGMented?

The :SAVE:WAVeform:SEGMented? query returns the current segmented

waveform save option setting.

Return Format

<option> ::= {ALL | CURR}

See Also • "Introduction to :SAVE Commands" on page 426

• ":SAVE:WAVeform[:STARt]" on page 439

• ":SAVE:WAVeform:FORMat" on page 440

• ":SAVE:WAVeform:LENGth" on page 441