Technical data

:SAVE Commands 24
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 445
:SAVE:WMEMory[:STARt]
(see page 790)
Command Syntax
:SAVE:WMEMory[:STARt] [<file_name>]
<file_name> ::= quoted ASCII string
The :SAVE:WMEMory[:STARt] command saves oscilloscope waveform data
to a reference waveform file.
See Also • "Introduction to :SAVE Commands" on page 426
• ":SAVE:WMEMory:SOURce" on page 444
• ":RECall:WMEMory<r>[:STARt]" on page 423
NOTE
If a file extension is provided as part of a specified <file_name>, it must be ".h5".