Technical data

:SBUS<n> Commands 25

Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 497

:SBUS<n>:SPI:CLOCk:TIMeout

(see page 790)

Command Syntax

:SBUS<n>:SPI:CLOCk:TIMeout <time_value>

<time_value> ::= time in seconds in NR3 format

The :SBUS<n>:SPI:CLOCk:TIMeout command sets the SPI signal clock

timeout resource in seconds from 100 ns to 10 s when the

:SBUS<n>:SPI:FRAMing command is set to TIMeout. The timer is used to

frame a signal by a clock timeout.

Query Syntax

:SBUS<n>:SPI:CLOCk:TIMeout?

The :SBUS<n>:SPI:CLOCk:TIMeout? query returns current SPI clock timeout

setting.

Return Format

<time_value> ::= time in seconds in NR3 format

See Also • "Introduction to :TRIGger Commands" on page 589

• ":SBUS<n>:SPI:CLOCk:SLOPe" on page 496

• ":SBUS<n>:SPI:SOURce:CLOCk" on page 499

• ":SBUS<n>:SPI:FRAMing" on page 498