Technical data

586 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

28 :TIMebase Commands

:TIMebase:WINDow:RANGe

(see page 790)

Command Syntax

:TIMebase:WINDow:RANGe <range value>

<range value> ::= range value in seconds in NR3 format

The :TIMebase:WINDow:RANGe command sets the full- scale horizontal time

in seconds for the zoomed (delayed) window. The range is 10 times the

current zoomed view window seconds per division setting. The main sweep

range determines the range for this command. The maximum value is one

half of the :TIMebase:RANGe value.

Query Syntax

:TIMebase:WINDow:RANGe?

The :TIMebase:WINDow:RANGe? query returns the current window

timebase range setting.

Return Format

<value> ::= range value in seconds

See Also • "Introduction to :TIMebase Commands" on page 578

• ":TIMebase:RANGe" on page 581

• ":TIMebase:POSition" on page 580

• ":TIMebase:SCALe" on page 583