Technical data

:TRIGger Commands 29
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 619
:TRIGger:PATTern:FORMat
(see page 790)
Command Syntax
:TRIGger:PATTern:FORMat <base>
<base> ::= {ASCii | HEX}
The :TRIGger:PATTern:FORMat command sets the entry (and query)
number base used by the :TRIGger:PATTern command. The default <base>
is ASCii.
Query Syntax
:TRIGger:PATTern:FORMat?
The :TRIGger:PATTern:FORMat? query returns the currently set number
base for pattern trigger patterns.
Return Format
<base><NL>
<base> ::= {ASC | HEX}
See Also • "Introduction to :TRIGger Commands" on page 589
• ":TRIGger:PATTern" on page 617