Technical data

654 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

30 :WAVeform Commands

:WAVeform:TYPE

(see page 790)

Query Syntax

:WAVeform:TYPE?

The :WAVeform:TYPE? query returns the acquisition mode associated with

the currently selected waveform. The acquisition mode is set by the

:ACQuire:TYPE command.

Return Format

<mode> ::= {NORM | PEAK | AVER | HRES}

See Also • "Introduction to :WAVeform Commands" on page 629

• ":ACQuire:TYPE" on page 195

• ":WAVeform:DATA" on page 637

• ":WAVeform:PREamble" on page 644

• ":WAVeform:SOURce" on page 649

NOTE

If the :WAVeform:SOURce is POD1 or POD2, the type is always NORM.