Technical data

:WGEN Commands 31
Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide 679
:WGEN:MODulation:FUNCtion:RAMP:SYMMetry
(see page 790)
Command Syntax
:WGEN:MODulation:FUNCtion:RAMP:SYMMetry <percent>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
The :WGEN:MODulation:FUNCtion:RAMP:SYMMetry command specifies the
amount of time per cycle that the ramp waveform is rising. The ramp
modulating waveform shape is specified with the
:WGEN:MODulation:FUNCtion command.
Query Syntax
:WGEN:MODulation:FUNCtion:RAMP:SYMMetry?
The :WGEN:MODulation:FUNCtion:RAMP:SYMMetry? query returns ramp
symmetry percentage setting.
Return Format
<percent><NL>
<percent> ::= symmetry percentage from 0% to 100% in NR1 format
See Also • ":WGEN:MODulation:AM:DEPTh" on page 672
• ":WGEN:MODulation:AM:FREQuency" on page 673
• ":WGEN:MODulation:FM:DEViation" on page 674
• ":WGEN:MODulation:FM:FREQuency" on page 675
• ":WGEN:MODulation:FSKey:FREQuency" on page 676
• ":WGEN:MODulation:FSKey:RATE" on page 677
• ":WGEN:MODulation:FUNCtion" on page 678
• ":WGEN:MODulation:STATe" on page 681
• ":WGEN:MODulation:TYPE" on page 682