Technical data

700 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide

32 :WMEMory<r> Commands

:WMEMory<r>:YOFFset

(see page 790)

Command Syntax

:WMEMory<r>:YOFFset <offset> [<suffix>]

<r> ::= 1-2 in NR1 format

<offset> ::= vertical offset value in NR3 format

<suffix> ::= {V | mV}

The :WMEMory<r>:YOFFset command sets the value that is represented at

center screen for the selected reference waveform.

The range of legal values varies with the value set by the

:WMEMory<r>:YRANge or :WMEMory<r>:YSCale commands. If you set the

offset to a value outside of the legal range, the offset value is

automatically set to the nearest legal value. Legal values are affected by

the probe attenuation setting.

Query Syntax

:WMEMory<r>:YOFFset?

The :WMEMory<r>:YOFFset? query returns the current offset value for the

selected reference waveform.

Return Format

<offset> ::= vertical offset value in NR3 format

See Also • Chapter 32, “:WMEMory<r> Commands,” starting on page 693

• ":WMEMory<r>:DISPlay" on page 696

• ":WMEMory<r>:YRANge" on page 701

• ":WMEMory<r>:YSCale" on page 702

• ":WMEMory<r>:SKEW" on page 699