Technical data

704 Agilent InfiniiVision 2000 X-Series Oscilloscopes Programmer's Guide
33 Obsolete and Discontinued Commands
:CHANnel<n>:INPut (see
page 712)
:CHANnel<n>:IMPedance
(see page 223)
:CHANnel<n>:PMODe (see
page 713)
none
:DISPlay:CONNect (see
page 714)
:DISPlay:VECTors (see
page 262)
:DISPlay:ORDer (see page 715)none
:ERASe (see page 716):DISplay:CLEar (see page 257)
:EXTernal:PMODe (see
page 717)
none
FUNCtion1, FUNCtion2 :FUNCtion Commands (see
page 277)
ADD not included
:FUNCtion:SOURce (see
page 718)
:FUNCtion:SOURce1 (see
page 293)
Obsolete command has ADD,
SUBTract, and MULTiply
parameters; current command
has GOFT parameter.
:FUNCtion:VIEW (see
page 719)
:FUNCtion:DISPlay (see
page 280)
:HARDcopy:DESTination (see
page 720)
:HARDcopy:FILename (see
page 721)
:HARDcopy:FILename (see
page 721)
:RECall:FILename (see
page 419)
:SAVE:FILename (see
page 419)
:HARDcopy:GRAYscale (see
page 722)
:HARDcopy:PALette (see
page 309)
:HARDcopy:IGColors (see
page 723)
:HARDcopy:INKSaver (see
page 301)
:HARDcopy:PDRiver (see
page 724)
:HARDcopy:APRinter (see
page 298)
:MEASure:LOWer (see
page 725)
:MEASure:DEFine:THResholds
(see page 344)
MEASure:DEFine:THResholds
can define absolute values or
percentage
:MEASure:SCRatch (see
page 726)
:MEASure:CLEar (see
page 343)
:MEASure:TDELta (see
page 727
)
:MARKer:XDELta (see
page 324)
:MEASure:THResholds (see
page 728)
:MEASure:DEFine:THResholds
(see page 344)
MEASure:DEFine:THResholds
can define absolute values or
percentage
Obsolete Command Current Command Equivalent Behavior Differences