Programming instructions

9
About this Book
About this Book
This guide provides reference information primarily for programming the
Agilent 81101A via remote control.
Chapter 1 “General Programming Aspects” on page 13 gives general
hints for programming instruments like the Agilent 81101A using SCPI
commands.
Chapter 2 “Programming Reference” on page 25 provides detailed
information on the SCPI commands supported by the instrument.
Chapter 3 “Specifications” on page 89 lists the instrument’s technical
specifications and provides exact definitions for the instrument’s
parameters.
For an introduction and information on the Agilent 81101A’s user
interface, please refer to the Quick Start Guide, p/n 81101-91020.