User`s guide

4-2 User’s and Service Guide
Front and Rear Panels
Front Panel
Front Panel
Figure 4-1 Front Panel
Line Power Switch
The test set line power switch is located at the bottom left corner of the
front panel. See Figure 4-1. The line power switch turns the power to
the test set either on or off.
The front panel line switch disconnects the mains circuits from the
mains supply after the EMC filters and before other parts of the
instrument.
Ports 1–24
Ports 1 through 24 are 50 Ω 3.5 mm connectors that are used to connect
to the device under test.
CAUTION Do not input more than 1 watt, RF and DC combined, to these ports or
damage to the internal RF switches or the analyzer may occur.
Reflection 50 Ω
Transmission 50 Ω
Test Ports 1–24Line Power Switch
Port Connection
Status LCD
Ground Connector