User`s guide

1-15
Making Measurements
Using Display Functions
3. Press , set to ON, set to
ON, and set to .
The display will appear as shown in Figure 1-9. Channel 1 is in the upper-left quadrant
of the display, channel 2 is in the upper-right quadrant, and channel 3 is in the lower
half of the display.
Figure 1-9 Three-Channel Display
4. Press Chan 4 (or press , set to ON).
This enables channel 4 and the screen now displays four separate grids as shown in
Figure 1-10. Channel 4 is in the lower-right quadrant of the screen.
Display
DUAL | QUAD SETUP
DUAL CHAN
AUX CHAN
SPLIT DISP
4X
Chan 2
AUX CHAN