User`s guide

7-87
Operating Concepts
Differences between 8753 Network Analyzers
Interfaces: RS-232, parallel, and DIN keyboard Yes Yes Yes
User-defined preset Yes Yes Yes
Non-volatile memory (in Kbytes) 512 2000 2000
Dynamic range: 30 kHz − 3 GHz
110 dB
a
110 dB
a
110 dB
a
Dynamic range: 3 GHz − 6 GHz 105 dB 105 dB 105 dB
Real time clock Yes Yes Yes
a. 90 dB from 30 kHz to 50 kHz; 100 dB from 300 kHz to 16 MHz.
Table 7-5 Comparing the 8753D/E/ES Option 011 Network Analyzers
Feature 8753D
Option 011
8753E
Option 011
8753ES
Option 011
Fully integrated measurement system (built-in test set) No No No
Test port power range (dBm)
−
a
−
a
−
a
Auto/manual power range selecting No No No
Port power coupling/uncoupling No No No
Internal disk drive Yes Yes Yes
Flash EPROM
No Yes Yes
Precision frequency reference (Option 1D5) Yes Yes Yes
Frequency range - low end (in kHz)
30/300
b
30/300
b
30/300
b
Ext. frequency range to 6 GHz (Option 006) Yes Yes Yes
75Ω system impedance (Option 075)
−
a
−
a
−
a
TRL*/LRM* correction Yes Yes Yes
Power meter calibration Yes Yes Yes
Interpolated error correction Yes Yes Yes
Enhanced response calibration
No Yes Yes
Maximum error corrected measurement points 1601 1601 1601
Configurable test set (Option 014)
N/A N/A N/A
Segmented error correction in frequency list mode Yes Yes Yes
Swept list frequency sweep
No Yes Yes
Sweep speed (201 points, one-port cal, ms) 200 77 70
Sweep speed (201 points, full 2-port cal) 510 145 121
Speed in time domain transform 350 46 42
Data I/O speed (GPIB) (ms, internal binary) 35 11 16
Four parameter display No Yes Yes
Markers/display channel 4 5 5
Total viewable markers at any time 8 20 20
Table 7-4 Comparing the 8753D/E/ES
Feature 8753D
8753E 8753ES