Specifications

PERFORMANCE TESTS
1-10. STORE AND LOAD FUNCTION TEST
This test verifies the HP 4285A's ability to store information to, and load information from a
memory card.
EQUIPMENT:
Memory Card
HP PN 04278-89001
PROCEDURE:
1. Perform a SYSTEM RESET as described on page 1-4.
2.
Insert a memory card into the MEMORY card slot.
3. Display the MEAS SETUP page.
NOTE
This test should be performed from the MEAS SETUP page.
4. Change the measurement function from Cp-D to Cp-G, in the FUNC field.
5. Use the CURSOR arrow keys to move the cursor to the SYS MENU field.
5. Press the 'STORE' softkey to store the HP 4285A's control settings to the memo-
ry card as data record-number 10.
6. Press the 'CLEAR SETUP' softkey to clear the set up, and then confirm that
FUNC is set to Cp-D.
7. Press the 'LOAD' softkey to load data record-number 10 from the memory card.
8.
Confirm that the measurement function is set to Cp-G.
1-24