Specifications
APPENDIXA
MANUAL
CHANGES
A-1.INTRODUCTION
This appendix contains the information required to adapt this manual to earlier versions or
configurations
of
the
HP
4285A than the current printing date of this manual. The informa-
tion
in
this manual applies directly to
HP
4285A Precision LCR Meters whose serial number
prefix is
listed on the title page of this manual.
A-2. MANUAL CHANGES
To adapt this manual to your
HP
4285A, refer to Tables A and
S,
and make all
of
the
manual changes listed opposite your instrument's serial number and ROM-based firm-
ware's version.
Instruments manufactured after the printing of this manual may
be
different than those
documented in this
manual. Later instrument versions will
be
documented in a manual
changes supplement that will accompany the manual shipped with that instrument.
If
your instrument serial number is not listed on the title page
of
this manual or in Table
A,
it
may be documented in a
yellow MANUAL CHANGES supplement.
Refer to the description
of
the *IDN? command
in
CHAPTER 9, COMMAND REFERENCE,
OPERATION
MANUAL
for confirmation of the ROM-based firmware's version.
Table
A.
Manual Changes by Serial Number
Serial Prefix
or Number
Make
Manual Changes
There
are
no earlier configurations than the printing
date of this
manual.
Table
S.
Manual Changes by Firmware's Version
Version
Make
Manual Changes
There
are
no earlier versions than the printing date
of
this manual.
A·1