Operating instructions

University of Saskatchewan
Electrical Engineering Laboratory Equipment Manual
Sampling Modes
The Real Time sampling mode is used for single shot and pulse waveforms. This mode
can be used for most signals. The Equ-Time mode is used for repetitive high frequency
waveforms.
Trigger
Edge triggers on a falling or rising transition. Pulse Width triggers after a time set pulse
width has occurred. Video trigger is used for video signals.
Printing the Display
The display can be printed to a USB printer ( not available ) or to a USB mass storage
device. The USB storage device is available from the technicians in 2C94. The mass storage
device is connected to the USB host port on the USB module at the rear. The mass storage has to
be connected to appear in the Save/Recall menu.
Display > ½ > Screen > Inverted
Save/Recall
Storage > USB
File Type > Bit map
Bmp Format > 8 or 24 bit
Save
The problem with this method is the black screen is saved and not the inverted
white screen. Use the Scope Connect Software to print the screen.