Operating instructions

University of Saskatchewan
Electrical Engineering Laboratory Equipment Manual
3000 Series Scope Connect Software
This software interfaces the scope to a computer. The GUI displays the scope screen and
controls. The scope controls can be adjusted form the GUI. Connect a cable from the USB – B
port on the back of the scope to the USB –A port on the front of the PC.
Start / programs / Electrical Engineering / Lab Equipment / Agilent DSO3000 Scope.
Click on the Connect to Oscilloscope icon in the tool bar. Click on the Show Virtual
Panel button in the DSO Controller window. The scope can be adjusted from the Virtual Panel
or DSO Controller window. Push the Disconnect icon on the tool bar to disconnect the scope
from the PC. Push the Force button on the front of the scope to acquire manual control of the
scope.
Print the Display using Scope Connect
The software must be controlling the scope. Using the Waveform window, push
the Refresh button and uncheck the color box for the display. Using the Waveform window,
push the Print button or the Export button for the output