Specifications

Changing the time reference position
1
Press
Main/Delayed
.
2
Choose the time reference position from the
Time Reference
softkeys:
•
To set the time reference so that most of the acquired data follows the
trigger, press
Left
.
The time reference indicator will be one division in from the left side
of the display. The trigger event will be at the same location unless the
delay is set to a value other than 0.
•
To set the time reference so that the acquired data is centered around the
trigger, press
Center
.
The time reference indicator will be at the middle of the display. The
trigger event will be at the same location unless the delay is set to a
value other than 0.
•
To set the time reference so that most of the acquired data precedes the
trigger, press
Right
.
The time reference indicator will be one division in from the right side
of the display. The trigger event will be at the same location unless the
delay is set to a value other than 0.
MegaZoom Concepts
Changing the time reference position
4-22