User`s guide

Safety Summary
10 E6000C Mini-OTDR User’s Guide, E0302
Submodule E6007A
The laser safety labels for the USA, according to 21 CFR
1040.10 Class II, are already attached to the module.
A sheet of laser safety warnings is included with the laser
module. You must stick the labels in the local language
onto the outside of the instrument, in a position where
they are clearly visible to anyone using the instrument.
All modules also have a CE class A label.
The recommended position for the laser safety warning
label is at the rear side of the instrument near the optical
output.
You must return instruments with malfunctioning laser
modules to an Agilent Technologies Service Center for
repair and calibration, or have the repair and calibration
performed on-site by Agilent Technologies personnel.