User`s guide

How to Print the Measurement 3 Sample Sessions: Measuring a Trace
E6000C Mini-OTDR User’s Guide, E0302
103
NOTE You can print a screen hardcopy by pressing and holding
the H
ELP key for 4 seconds. You can print to an attached
printer (which must be correctly configured), or to a PCX
file (see below).
How to make a screen dump
As well as printing the current measurement, you can also
make a screendump of the current page. This is saved in a
PCX file, You can do this from any screen in your Mini-
OTDR.
You make a screen dump as follows.
1 Hold the Help button for 4 seconds until you hear a
beep.
You see a screen asking you where you want the
destination of the screen bitmap to be.
Figure 34 Make screendump dialog
2 Cursor to
File and press SELECT.
The file is now saved in your Mini-OTDR’s internal
directory structure. You can now copy the file, for
example, to a floppy disk, and view it on your pc.
For more information about copying files, see “The File
Utilities screen” on page 59.
NOTE You can also use this procedure to print the current
screen to an attached printer. Simply select
Printer
instead of File when you are asked for the screen bitmap
destination.