User`s guide
5 Sample Sessions: Instrument Configuration How to Set the General Configuration
130 E6000C Mini-OTDR User’s Guide, E0302
How to Set the General
Configuration
Start up screen 1 Switch on the Mini-OTDR. You will see one of the
following screens:
Select Instrument Config – If you see a series of boxes like Figure 6, you are in
the Applications Screen. Cursor Right to
Instrument Config and press S
ELECT.
– If you see an empty trace like Figure 7, you are in
OTDR mode or EasyMode.
Press S
ELECT to access the popup panel:
If the top right option is [C
ONFIG.], you are in OTDR
Mode. Select [C
ONFIG.], then select <INSTRUMENT
C
ONFIG.> from the submenu that now appears.
If the top right menu option is [P
RINT], you are in
EasyMode. Select [C
LOSE] from the popup panel. You
are now at the Applications Screen, and can select
Instrument Config
.
– If you see a menu like Figure 57, you are in the
Multiple Fiber Test. Select Close, then select
Instrument Config
from the Applications screen.
– Otherwise, you are in Fiber Break Locator (Figure
65) or Source Mode (Figure 66). Move to the Close
box and press S
ELECT. You are now at the
Applications Screen, and can select Instrument
Config.
How to Set the General Parameters
2 You now see a window with the headings Instrument
Configurations and General Parameters. The