User`s guide

How to Connect to a PC using the RS232 5 Sample Sessions: Instrument Configuration
E6000C Mini-OTDR User’s Guide, E0302
139
Bring up default Info 12 Select Defaults from the Trace Info screen. You see
the labels and comments that you have just set.
13 Cursor U
P to each label and press SELECT. You see a
keyboard on the screen which lets you modify the
comment. Press Ok in the keyboard when you have
completed each comment.
Delete label 14 If you want to delete any label, press Clear.
You see a menu allowing you to clear any individual
label, or All labels.
NOTE The default comments are intended as a starting point for
the file information, and should be modified for the
current trace.
15 Confirm by selecting Ok. When you print or save a
measurement, the comments and labels are also
printed/saved.
See “How to Print the Measurement” on page 100 and
“How to Save the Measurement” on page 104 for
information on printing/saving measurements.
How to Connect to a PC using
the RS232
This is a brief example of how you configure your Mini-
OTDR for connecting to a PC. For more details and
information about the hardware settings, please consult
the Agilent OTDRs Programming Manual (E4310-91016).