User`s guide

6 Sample Sessions: Other Mini-OTDR Modes How to set up a Multi Fiber Test
154 E6000C Mini-OTDR User’s Guide, E0302
How to Set the Multi Fiber Test
Measurement Parameters
Measurement Parameters
screen
1 Navigate to the Multi Fiber Test Measurement
Parameters screen.
See “How to Navigate within the Multi Fiber Test
Config page” on page 152 for details of how to navigate.
You see the Measurement Parameters screen (Figure 59).
Figure 59 Multi Fiber Test Measurement Parameters screen
2 Cursor up to the first Measurements edit field, and
press S
ELECT. Select the file containing your desired
setting. If the file is on a different device (for example,
a floppy disk), select Device.
How to change the settings
If you have selected a Settings file (one with the extension
.SET), you may alter the settings saved within this file.
Measurements are taken with the new settings and the file
is permanently changed.
You change the settings as follows
3 Cursor right to the
Modify button and press SELECT.