User`s guide

6 Sample Sessions: Other Mini-OTDR Modes How to set up a Multi Fiber Test
158 E6000C Mini-OTDR User’s Guide, E0302
Figure 61 Multi Fiber Test General Parameters screen
Start Fiber number 2 If you want, change the Start Fiber number, by which
the first fiber is identified.
The default names of traces saved in Mutifiber Test
mode automatically contain the fiber number.
For example, if the Start Fiber number is 100, the first
fiber saved with settings from DEMO.SOR will have the
name DEMO_100.SOR, the next fiber saved will be
DEMO_101.SOR, and so on.
Storage Directory 3 By default, traces from Mutifiber Test mode will be
stored in the top-level directory in the Mini-OTDR
internal memory.
If you want to store your traces somewhere else, select
Storage Directory, and choose a new directory
and/or device.
Auto Scan Trace 4 If you want to generate an Event Table for each trace,
check Auto Scan Trace.
Auto Pass/Fail 5 If you want to perform a Pass/Fail test on each trace,
check Auto Pass/Fail.