User`s guide
Installing New Firmware A Installation and Maintenance
E6000C Mini-OTDR User’s Guide, E0302
183
• Inside the shipping box are 2 inserts. One insert is a
folded separator to keep the power supply and the
power cord. The second insert goes around the
softcase. It is a corrugated part including convoluted
foam on the outer side.
• If you do not have the original shipping box you must
use an appropriate shock absorbing material.
Shipping container • Seal the shipping container securely.
• Mark the shipping container FRAGILE to encourage
careful handling.
• In any correspondence, refer to the instrument by
model number and serial number.
CAUTION If you use foam to pack the box, make sure you use a soft
foam. EPS and most other foams may be too hard.
Installing New Firmware
Follow the steps in “How to Update the Firmware and
Languages” on page 144