User`s guide

D Single-Mode/Multimode Module Performance Tests General
220 E6000C Mini-OTDR User’s Guide, E0302
Single-mode Modules (E6001A - E6004A, E6003B,
E6008B, and E6012A-E6013A)
• Optical Attenuator Agilent 8156A #101
(Return loss > 40 dB, Repeatability < 0.01 dB).
• Single-mode fiber with 3 dB coupler and known length
(between 4 and 5 km), for example, the Agilent
Recirculating Delay Line (P/N 08145-67900).
•3
× Optical Connector Interface Agilent 81000AI.
• Single-mode fiber: length 25
± 2 km.
Extra equipment for slanted
connectors
If you are using slanted optical connectors, you also need
the following equipment:
• Single-mode patchcord DIN angled PC
Agilent 81113PC.
• Adapter PC Agilent 81000FI.
• Universal Interface Agilent 81000UI.
Multimode Module (E6005A/E6009A)
• Optical Attenuator for 850/1300 nm, 62.5 µm MM,
attenuation 30-50 dB (including insertion loss).
• Multimode fiber with 3 dB coupler and known length
(between 4 and 5 km).
•3
× Optical Connector Interface Agilent 81000AI.
•1
× Universal Thru Adapter Agilent 81000UM.
• Single-mode fiber, length 25
± 2km.
Test R ecor d
Results of the performance test may be noted in the
performance test record. The test record can also be used
as a permanent record and may be reproduced without
written permission from Agilent Technologies.