User`s guide

Safety Precautions E Cleaning Information
E6000C Mini-OTDR User’s Guide, E0302
273
Safety Precautions
Please follow the following safety rules:
• Do not remove instrument covers when operating.
• Ensure that the instrument is switched off throughout
the cleaning procedures.
• Use of controls or adjustments or performance of
procedures other than those specified may result in
hazardous radiation exposure.
• Make sure that you disable all sources when you are
cleaning any optical interfaces.
• Under no circumstances look into the end of an optical
device attached to optical outputs when the device is
operational. The laser radiation is not visible to the
human eye, but it can seriously damage your eyesight.
• To prevent electrical shock, disconnect the instrument
from the mains before cleaning. Use a dry cloth, or one
slightly dampened with water, to clean the external
case parts. Do not attempt to clean internally.
• Do not install parts or perform any unauthorized
modification to optical devices.
• Refer servicing only to qualified and authorized
personnel.