User`s guide

E Cleaning Information How to clean connector adapters
286 E6000C Mini-OTDR User’s Guide, E0302
3 Blow away any remaining lint with compressed air.
How to clean connector
adapters
CAUTION Some adapters have an anti-reflection coating on the back
to reduce back reflection. This coating is extremely
sensitive to solvents and mechanical abrasion. Extra care
is needed when cleaning these adapters.
Preferred Procedure
Use the following procedure on most occasions.
1 Clean the adapter by rubbing a new, dry cotton-swab
over the surface using a small circular movement.
2 Blow away any remaining lint with compressed air.
Procedure for Stubborn Dirt
Use this procedure particularly when there is greasy dirt
on the adapter:
1 Moisten a new cotton-swab with isopropyl alcohol.
2 Clean the adapter by rubbing the cotton-swab over the
surface using a small circular movement.
3 Take a new, dry soft-tissue and remove the alcohol,
dissolved sediment and dust, by rubbing gently over the
surface using a small circular movement.
4 Blow away any remaining lint with compressed air.