User`s guide

Safety Summary
E6000C Mini-OTDR User’s Guide, E0302
3
Safety Summary
The following general safety precautions must be
observed during all phases of operation of this
instrument. Failure to comply with these precautions or
with specific warnings elsewhere in this manual violates
safety standards of design, manufacture, and intended
use of the instrument. Agilent Technologies assumes no
liability for the customer’s failure to comply with these
requirements.
GENERAL
This product is a Safety Class 3 instrument (provided
with a protective earth terminal). The protective features
of this product may be impaired if it is used in a manner
not specified in the operation instructions.
All Light Emitting Diodes (LEDs) used in this product are
Class 1 LEDs as per IEC 60825-1.
ENVIRONMENTAL CONDITIONS
This instrument (without AC Adapter) is intended for
outdoor use in an installation category II, pollution degree
2 environment. It is designed to operate at a maximum
relative humidity of 95% and at altitudes of up to 2000
meters. Refer to the specifications tables and
“Temperature and Humidity” on page 179 for the ac
mains voltage requirements and ambient operating
temperature range.
BEFORE APPLYING POWER
Verify that the product is set to match the available line
voltage, the correct fuse is installed, and all safety
precautions are taken. Note the instrument’s external
markings described under Symbols.