User`s guide

OTDR Mode 1 Getting Started

E6000C Mini-OTDR User’s Guide, E0302

• Easy OTDR enables you to view a trace, and to perform

simple operations like Print and apply presaved

settings. See “EasyMode” on page 62.

• Multi Fiber Test allows you to define up to 4

measurements, and apply all measurements to multiple

fibers (for example, all fibers in a cable). See “How to

set up a Multi Fiber Test” on page 152

• OTDR Assistant runs the OTDR Assistant, which walks

you through a typical OTDR measurement, and gives

you some hints about which parameters you need to

adjust.

• OTDR Training runs the OTDR Training package,

which gives you some background information about

OTDRs.

NOTE You can change the Boot Into mode in Instrument

Config. This changes the mode that appears when you

power on.

Use the Cursor keys to move to the application you want,

and then press S

ELECT.

OTDR Mode

Select OTDR Mode from the Applications Screen (or

switch on after configuring Boot Into OTDR Mode, see

note above).

Trace screen The first time you select OTDR Mode you see a blank trace

window.