User`s guide

1 Getting Started OTDR Mode
44 E6000C Mini-OTDR User’s Guide, E0302
Trace Overview • No matter when you zoom to a point of interest on the
trace, you do not lose orientation, as there is an
overview display in the full-trace window. You always
know where you are. The full-trace window is shown in
the bottom left-hand corner of the display.
In the title bar you can see the name of the
measurement file (UNNAMED if you have not already
saved the measurement).
Parameter window • The most important measurement parameters of the
displayed trace (such as measurement range,
pulsewidth, wavelength) are always shown in the
parameter window. See “The parameter windows”
below.
NOTE If the parameters are changed for the next
measurement, the parameters of the actual trace are
still displayed, but they are grayed to indicate that they
will change on the next measurement.
Current Mode
• On the right-hand side of the screen you can see the
Current mode (Marker) and the current interpretation
of the C
URSOR and SELECT keys. See “The Cursor and
Select keys” on page 46.
The parameter windows
You see the following information in the parameter
windows at the foot of the trace window.
Figure 9 The parameter windows