User`s guide

1 Getting Started The Settings screen
50 E6000C Mini-OTDR User’s Guide, E0302
The Settings screen
Select SETTINGS from the popup panel. You see one of the
two pages of the Settings screen: Measurement
Settings or Pass/Fail Parameters.
Change Settings screen You switch between the Settings pages by selecting one of
the arrows at the bottom left of the Settings screen
(Figure 11).
Figure 11 Settings page navigation arrows
Change parameters To change a parameter in the settings screen, move to the
appropriate box and press S
ELECT. You can then change
the appropriate parameter.
For details on how to change variables, see “How to Set
the General Parameters” on page 130.
Store and Recall settings If you want to save the current settings in a file, select
Store... to see the Store menu. Select <S
AVE AS..> and
specify a filename with the extension .SET. To recall the
saved settings, select <L
OAD..> from the Recall...
menu.
You can also use Store... to store default settings for
the current Wavelength.
Default for current Wavelength You recall the default for the current wavelength by
selecting Default. You recall the default for other
wavelength from the appropriate entry in the Recall...
menu.
You can also recall the saved settings in EasyMode.