User`s guide

The File Utilities screen 1 Getting Started
E6000C Mini-OTDR User’s Guide, E0302
59
limit is not active, you see a value of -.--- km in the
Link Tolerance edit field.
If no Length Tolerance is set, the distance between the
Horizontal Offset and the Fiber End must be exactly
the same as the Link Length.
If no Link Length has been set, the value of the Length
Tolerance is irrelevant.
Event Masking • Event Masking: Specify events to be masked. See
“How to Mask Events” on page 92.
If Event Masking is On, some or all Events are ignored
when a Pass/Fail test is performed. They are therefore
never entered into the Pass/Fail test table. If Event
Masking is Off, no Events are masked.
The File Utilities screen
You see the File Utilities screen by selecting File Utility
from the Applications screen, or by selecting <U
TILITY>
from the [F
ILE] menu in OTDR mode.
The File Utilities screen allows you to perform standard
operations on one or more files.