User`s guide

The File Utilities screen 1 Getting Started

E6000C Mini-OTDR User’s Guide, E0302

Copy: Copy the currently selected file(s). When you select

this option, you may choose a new directory or a different

device.

If no file is selected, this option is grayed.

Print: Print the currently selected file(s).

You must have a printer connected to the Mini-OTDR. For

more information, see “How to Print the Measurement” on

page 100.

If no file is selected, this option is grayed.

NOTE You may only print traces. Traces usually have the

extension .SOR, .TRC, or .TPL.

Select device Device: Select a device from I

NTERNAL, FLOPPY,

AMCARD, and FLASHDISK. The files displayed at the left

of the File Utilities screen correspond to the current

device.

NOTE Before you select F

LOPPY, SRAMCARD, or FLASHDISK, you

must insert a floppy disk, an SRAM Card, or a Flash Disk

as appropriate.

See “Inserting and Removing a Floppy Disk, Flash Disk, or

SRAM Card” on page 72 for details.

Format device Format: Format a device. You may choose between

Internal, Flash Disk, SRamCard and Floppy.

Please note that the Mini-OTDR cannot perform a “low-

level format” (one which involves creating a new file

system) on a floppy disk. This means that you cannot

format a completely unformatted floppy disk with your

Mini-OTDR. This must be done on a PC.

The format function on your Mini-OTDR is similar to the

“Quick Format” function on a PC.

WARNING Formatting a device will destroy all data on the device.