User`s guide

Battery Handling 2 Additional Features

E6000C Mini-OTDR User’s Guide, E0302

The submodule slips easily in and out of its slot (Figure

21). When the submodule is in place, you can now connect

an Optical Output Connector and a fiber, and lock the

module.

Battery Handling

Inserting and Removing a Battery

The battery should be inserted in the slot at the foot of the

Mini-OTDR (see Figure 22.)

NOTE Make sure that you insert the battery in the correct

direction, and that you close the battery cap correctly.

NOTE Only use the Agilent spare NiMH battery pack (Agilent

Product Number E6080A) or comparable batteries. Other

batteries may be damaged by the Mini-OTDR battery

charger

Battery cap Before inserting or removing the battery, pull down the

cap at the bottom of the right-hand side of the machine.

The battery will then slide in and out.