User`s guide

How to Use the Event Table 3 Sample Sessions: Measuring a Trace

E6000C Mini-OTDR User’s Guide, E0302

How to Use the Event Table

NOTE You can also add events manually. See the online

documentation for further information.

By default, the OTDR automatically scans the trace for

non-reflective events (for example splices) and reflective

events (for example connectors). These events are shown

on the event bar and in the event table.

NOTE If you do not want traces to be scanned automatically,

select <A

UTO SCAN> in the [VIEW] menu. There will now no

longer be a tick beside <A

UTO SCAN>.

To reactivate automatic scanning, select [V

IEW]<AUTO

CAN> again.

This section describes how to read the event table.

How to Display the Event Table

To display the event table on the screen:

1 Select [V

IEW] from the popup panel.

2 If you do not have an Event Table visible above the

trace, there will be no tick next to <E

VENT TABLE>.

Cursor D

OWN to <EVENT TABLE> and press the SELECT

key.