User`s guide

3 Sample Sessions: Measuring a Trace How to Set the Fiber End
98 E6000C Mini-OTDR User’s Guide, E0302
How to Hide Events before the Offset
3 Select the menu option [VIEW]<EVENTS BEFORE OFFSET>
Events to the left of the Horizontal offset are now
hidden in the Event Bar and Event Table.
Events to the left of the horizontal offset have negative
distances in the Location column of the Event Table.
How to Clear the Horizontal Offset
4 Select the menu option [VIEW]<CLEAR H-OFFSET>.
The offset is cleared, and you see all events in the Event
Table and Event Bar even if Events Before Offset
is not set.
NOTE If you change the Measurement Span in the [S
ETTINGS]
menu, and the Horizontal Offset does not lie inside the
range of the current span, the Horizontal Offset is also
deleted.
How to Set the Fiber End
Either
1 Select [S
ETTINGS] from the OTDR Mode popup panel.
2 If you are not already viewing the Meas. Parameter
page (Figure 12), cursor to either of the arrows at the
bottom left of the screen. Press S
ELECT to bring up the
next page.