Product specifications

41
Supplemental characteristics
for all model numbers
DC floating voltage: Output terminals can
be floated up to ±240 VDC maximum from
chassis ground
Remote sensing: Up to two volts dropped
in each load lead. Add 2 mV to the voltage
load regulation specification for each one
volt change in the positive output lead
due to load current change.
Command processing time: Average time
required for the output voltage to begin
to change following receipt of digital data
is 4 ms for the power supplies connected
directly to the GPIB. (Display disabled).
Output programming response time: The
rise and fall time (10/90% and 90/10%)
of the output voltage is less than 2 ms
(400 s in fast mode). The output voltage
change settles within 1 LSB (0.025% x
rated voltage) of final value in less than
6 ms (2 ms in the fast mode).
GPIB interface capabilities: IEEE-488.2,
SCPI command set and 6630A Series
programming compatability
Software driver:
VXIPlug&Play
Measurement time: Average time to
make a voltage or current measurement
is 50 ms.
Input power (full load): 3.5 A, 250 W
Regulatory compliance: Complies with
EMC directive 89/336/EEC (ISM 1B).
Size: 425.5 mm W x 88.1 mm H x
364.4 mm D (16.8 in x 3.5 in x 14.3 in).
Weight: Net, 12.7 kg (28 lb) net;
15.0 kg (33 lb) shipping
Warranty: One year
Single-Output: 80-100 W GPIB (Continued)
Sp ecifica ti on s
(at 0° to 55°C unless
otherwise specified)
More detailed specifications at www.agilent.com/find/6630
High Performance DC Power Supplies speed and accuracy for test optimization
6631B 6632B 6633B 6634B
Supplemental Characteristics (Non-warranted characteristics determined by design and useful
in applying the product)
Average programming resolution
Voltage 2 mV 5 mV 12.5 mV 25 mV
Current 2.5 mA 1.25 mA 0.5 mA 0.25 mA
Sink current 10 A 5 A 2 A 1 A
Sink current tracking
SCPI mode 0.4% + 0.4% + 0.4% + 0.4% +
4 mA 2 mA 1 mA 0.5 mA
Compatability mode -500 mA -250 mA -100 mA -50 mA
Minimum current in constant current mode* 40 mA 20 mA 8 mA 4 mA
*When programming in the 6630A Series language compatibility mode.
Ordering Information
Opt 100 87 to 106 VAC, 47 to 63 Hz
Opt 120 104 to 127 VAC, 47 to 63 Hz
Opt 220 191 to 233 VAC, 47 to 63 Hz
Opt 230 207 to 253 VAC, 47 to 63 Hz
Opt 020 Front-panel binding posts
(N/A on 6631B)
Opt 760 Isolation and reversal relays,
only available at time of order
(N/A on 6631B)
* Opt 1CM Rack-mount kit,
p/n 5063-9212
* Opt 1CP Rack-mount kit with handles,
p/n 5063-9219
Opt 0L1 Full documentation on
CD-ROM, and printed standard
documentation package
Opt 0L2 Extra copy of standard
printed documentation package
Opt 0B0 Full documentation on
CD-ROM only
Opt 0B3 Service manual
* Support rails required
Accessories
p/n 1494-0060 Rack slide kit
E3663AC Support rails for Agilent
rack cabinets
Agilent Models: 6631B, 6632B, 6633B, 6634B
Terminal Strip Detail
Output 2 & 3
Top
Side
Rear
364.4 mm
14.3"
100 mm
3.93"
425.4 mm
16.75"
+S +
- -S
88.1 mm
3.5"
Screw Size:
M35 x 0.6