Operating instructions

Language Dictionary

PULSe A one-shot pulse that alternates between LEVel and TLEVel upon

occurrence of an explicit trigger.

TOGGle Each explicit trigger causes the input to alternate between LEVel and

TLEVel.

The input levels (LEVel and TLEVel) are programmed from the Current, Resistance, or

Voltage Subsystems. So is SLEW, which determines the rate at which the input changes

from one level to the other.

Note

For a detailed description of transient subsystem operation, see Operation Overview in the

Electronic Load Operating Manual.

Keywords

Command

TRANsient[:STATe] ON|1

Function

Enable Transient function.

TRANsient[:STATe] OFF|0

Disable Transient function.

TRANsient:MODE

CONTinuous

Select continuous pulse train varying between LEVel and TLEVel at

FREQuency.

TRANsient:MODE PULSe

Select single triggered pubes of duration TWIDth.

TRANsient:MODE TOGGle

Select pulses that switch between LEVel and TLEVel on alternate triggers.

TRANsient:DCYCle

Set pulse duty cycle of CONTinuous mode.

TRANsient:FREQuency

Set pulse frequency of CONTinuous mode.

TRANsient:TWIDth

Set pulse duration of PULSe mode.

Related Commands

LEVel <GET> *TRG SLEW TLEVel

Related Subsystem

TRIGger Subsystem