Service manual

A-4 Reference

For a

Male

Cable Connector:

Using a 20 mm torque wrench, rotate the connector nut on the

cable

(see Figure A-2).

USE 20mm TORQUE

WRENCH HERE

USE 5116” TORQUE

WRENCH HERE

Figure A-2.

Where to Position Wrenches to Connect

a 2.4 mm Connector to a DUT

9. For a Female Cable Connector:

--Y

Hand tighten the

5/16

inch nut on the

DUT.

Using a

5116

inch torque wrench, rotate the

DUT

connector nut

onto the female cable connector (see Figure A-2).

HP 85133E/F