Technical data

Installation 1
Agilent Multimode for 6210/6220 TOF Installation and Maintenance Guide 19
Figure 13 RS-232 cable connections
7 Connect the (RS-232) from HV module to the Serial connector on Smart
card 4 interface. See Figure 13.
8 Connect the 15V dc power supply to the HV and control PCA. See Figure 14
and Figure 15.
9 Connect the other end of the 15V dc power supply into an 110V ac outlet
using the power cord supplied with the 15V dc power supply. See See
Figure 14 and Figure 15.
Serial connector on Smart card