Technical data

Agilent Multimode for 6210/6220 TOF Installation and Maintenance Guide 5

Contents

1 Installation 7

Installation 9

Step 1. Prepare to install 9

Step 2. Remove the TOF E-Tub Electronics 10

Step 3. Change the firmware chips on the Analyzer and Power Distribution

Boards 11

Step 4. Install the three 10M

Ω cables 14

Step 5. Install the HV control PCA and cables 16

Step 6. Attach the multimode source to the instrument 21

Step 7. Install the nebulizer, corona needle, and gas connections 24

Changing Sources 26

To convert between the ESI, APCI or APPI and the multimode ion source 26

2TOF Software and TOF Firmware Upgrade for Multimode 31

Step 1. Upgrade the TOF Software 32

Step 2. Upgrade the TOF firmware 35

Step 3. Pump down the LC/MSD TOF and condition the high voltage

electronics 36

3 Installation Verification 37

Step 1. Auto tune 38

Step 2. Set up method names and parameters 44

Step 3. Create MMCHECKTOF_EI_POS.m 45

Step 4. Create MMCHECKTOF_EI_NEG.m 47

Step 5. Create MMCHECKTOF_CI_POS.m 49

Step 6. Create MMCHECKTOF_CI_NEG.m 51

Step 7. Create MMCHECKTOF_MX_EI POS_CI POS.m 53

Step 8. Create MMCHECKTOF_MX_EI NEG_CI NEG.m 55