Specifications

System Instrument Configuration 35Chapter 2
Agilent E1333A
3-Channel Universal
Counter Module
The Agilent E6182A contains an Agilent E1333A B-Size Universal Counter
with the Agilent E1403B B-size to C-size Active Adapter Module and
cables. The Agilent E1333A Counter performs frequency, time interval,
period and totalize measurements. The counter is connected to the UUT
through the Agilent E6171 Measurement Control Module. The counter uses
only one row on J1, since the counter inputs are referenced to earth ground.
Switch/Jumper Settings Figure 2-1 shows the Agilent E1333A logical address switch with the switch
shown in the factory setting. Set the logical address to match the VXI
mainframe slot number for a one mainframe system. For a two mainframe
system, set to the slot number plus 16, if in mainframe #1, or to the slot
number plus 32, if in mainframe #2. Refer to “VXI Module Locations And
Logical Addresses” on page 32. The Interrupt Priority is always set to 1.
Figure 2-1. Agilent E1333A Universal Counter Module and Cables
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com