Specifications

33
Extensive device protection
To safeguard your device from
damage, the N8700 series power
supplies provide over-temperature,
over-current and over-voltage pro-
tect (OVP) to shut down the power
supply output when a fault occurs.
They also offer an undervoltage
limit (UVL) that prevents adjust-
ment of the output voltage below
a certain limit. The combination
of UVL and OVP capabilities lets
you create a protection window
for sensitive load circuitry.
Simplify system connection
The N8700 offers many system
oriented features to simplify and
accelerate test system development.
They support the industry standard
SCPI commands and come standard
with software drivers.
Withbuilt-inGPIB,Ethernet/LAN,
andUSB2.0interfaces,theN8700
gives you the flexibility to use your
I/O interface of choice today and
in the future.
Additionally, the built-in Web
server lets you operate, configure,
and monitor the N8700 remotely
via a standard browser such as
Microsoft® Internet Explorer.
Analog programming and monitoring
The output voltage and current can
be programmed from zero to full
scale by either an analog voltage
0 to 5 V or 0 to 10 V or by resistance
of 0 to 5 kΩ or 0 to 10 kΩ.
Single-Output 3.3-5.2 KW GPIB, LAN, USB
(Continued)
More detailed specifications at www.agilent.com/find/N8700
Basic DC Power Supplies essential features for a tight budget
Supplemental Characteristics
(Non-warranted characteristics determined by design
that are useful in applying the product)
Output response time
Up-prog response time
8
80 ms 80 ms 80 ms 80 ms 80 ms 80 ms
Down-prog response time Full-load
8
20 ms 100 ms 100 ms 100 ms 160 ms 160 ms
Down-prog response time No-load
9
500 ms 600 ms 700 ms 800 ms 900 ms 1000 ms
Remote sense compensation 2 V 2 V 2 V 2 V 5 V 5 V
Output ripple and noise
CC rms
10
1300 mA 1200 mA 880 mA 660 mA 300 mA 200 m
Programming resolution
Measurement resolution
Voltage 0.96 mV 1.2 mV 1.8 mV 2.4 mV 3.6 mV 4.8 mV
Current 48 mA 39.6 mA 26.4 mA 19.8 mA 13.2 mA 10.2 mA
N8731A N8732A N8733A N8734A N8735A N8736A
Specifications
(at 0° to 55°C unless
otherwise specified)
Notes:
8
From 10% to 90% or 90% to 10% of rated output voltage, with rated, resistive load.
9
From 90% to 10% of rated output voltage.
10
For 8 V - 15 V models the ripple is measured from 2 V to rated output voltage and rated output current.
For other models, the ripple is measured at 10 - 100% of rated output voltage and rated output current.
Agilent Models: N8731A-42A, N8754A-62A