User`s guide

How to Change a Number Field Operating the Agilent 81133A/81134A Pulse Generator

Agilent 81133A/81134A Pulse Generator User’s Guide, September 2008 25

3 Press and rotate the navigation knob to set the least significant

digit to change.

NOTE This method is useful for fine-tuning. It also changes the values in

real- time, so that you can immediately see the changes at the

output.

4 Rotate the navigation knob to change the value.

5 Press the navigation knob once when you are done.

Changing Single Digits

NOTE This procedure can also be used to change the unit of the

parameter.

1 Focus at the number field by rotating the navigation knob to the

desired position.

2 Press and rotate the navigation knob to select the digit (number

or unit).

NOTE You can also press the arrows next to navigation knob.

3 Release the navigation knob.

Now when you rotate it, the number (or the unit) changes.

4 Press the navigation knob to set the number (or the unit).

You can now see the changes at the output.

Press