User`s guide

1-3
Getting Started
Setting Up the Agilent 83433A
Step 1. Inspect the Shipment
NOTE
The Agilent 83433A is supplied with an optical jumper cable. To avoid costly
replacement, do not misplace this cable.
❒
Inspect the shipping container for damage.
❒
Inspect the instrument.
❒
Verify that you received the options and accessories you ordered.
Keep the shipping container and cushioning material until you have inspected
the contents of the shipment for completeness and have checked the light-
wave transmitter mechanically and electrically.
The lightwave transmitter is packed within a carton. Refer to “Returning the
Instrument for Service” on page 3-16, for the description and part numbers of
the packaging materials. Refer to “Options” on page 3-2, for the accessories
shipped with the lightwave transmitter.
If the shipping materials are in good condition, retain them for possible future
use. You may wish to ship the lightwave transmitter to another location or
return it to Agilent Technologies for service. Refer to “Returning the Instru-
ment for Service” on page 3-16.